66 Planning and Installation Guide ShoreTel IP Phone 930D
Reference Material Understanding Configuration Parameters
5
DectRingerLevelsDb Up to 255 ASCII
Characters
Set the audio levels of the ringer using a comma
separated list of the following settings. The default
values in decimal are listed next to the name for clarity.
RxGain 0 -128
RxGain1 -12
RxGain2 -8
RxGain3 -5
RxGain4 0
RxGain5 4
RxGain6 8
It is recommended that you do not change any value by
more than +/- 2 dB from the default values listed.
CFG Refer to "Value"
column.
DectSpeakerLevelsDb Up to 255 ASCII
Characters
Set the audio levels of the speakerphone using a
comma separated list of the following settings. The
default values in decimal are listed next to the name for
clarity.
TxGain 0
RxGain1 3
RxGain2 6
RxGain3 9
RxGain4 12
RxGain5 14
RxGain6 18
It is recommended that you do not change any value by
more than +/- 2 dB from the default values listed.
CFG Refer to "Value"
column.
DectSyncTime 10 to 360 Period in seconds between when the elements in the
multicell system are synchronized.
CFG 60
DectVoiceMail Up to 64 ASCII
Characters
String that is displayed on the Menu screen to access
voice mail. Must be 14 characters or less. Characters in
this string must be specified using UTF-8.
CFG “Voice Mail”
DectSysChainId 0 to 9999 This parameter identifies the ID of the System Chain that
the base belongs to. Systems with the same ID will have
a radio synching relationship to maximize channel
usage.
CFG 0821
DHCP 1 ASCII Character DHCP enable/disable
0=Disabled
1=Enabled
MAN 1
DhcpCache 1 ASCII Character Enable or disable DHCP caching.
0=Disabled
1=Enabled
When the config file is processed, if set to 0 the DHCP
cache is cleared and DHCP will not be cached again
until enabled.
CFG 1
DscpAudio Up to 2 ASCII
characters
Differentiated services code point for audio packets.
Allowed values of 0 to 63. This parameter applies to all
Layer 3 packets.
CFG,
LLDP
0
DscpSignaling Up to 2 ASCII
characters
Differentiated services code point for audio packets.
Allowed values of 0 to 63. This parameter applies to all
Layer 3 packets.
CFG,
LLDP
0
Parameter Value Type Value Sources Default
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com