Reference Material Understanding Configuration Parameters
5
ShoreTel IP Phone 930D Planning and Installation Guide 69
SetupPassword 32 ASCII Characters This is the MD5 hash of the password that must be
entered after the Mute button is pushed to enter a
manual key command. Note that this password must be
saved in flash after a value has been received from the
MGC so it can be enforced on subsequent reboots. It is
not cleared by the CLEAR command nor the clear step
in the SETUP command.
MGCP,
DHCP
1234
SntpServer Dotted Decimal ASCII SNTP server address in dotted decimal format. DHCP,
CFG, MAN
0.0.0.0
SubNetMask Dotted Decimal ASCII Network Mask for the base. On boot, the base checks
for a non-zero NV value, and if one is present it is used.
DHCP,
MAN
0.0.0.0
SysLogInfo Up to 32 ASCII
Characters
IP Address, module, verbose level, facility code, and
output device of the SysLog function. The port number
may be optionally identified and appended to the IP
address. The default of 514 will be used if no port is
specified.
The module is a 32-bit integer where each bit refers to
the debug enable/disable status from a specific software
module. Bit assignments are:
0: “MGCC” #MGCP
1: “MCFGP” #config file parser
2: “MUSTG” #not used
3: “MNETC” #network configuration
4: “MUI” #DECT man machine interface
5: “MDIS” #not used - display module
6: “MPROV” #provisioning
7: “MAINT” #maintenance
8: “MRMON #not used
9: “MFWU” #DECT firmware upgrade
10: “MVPN” #not used
11: “MM” # DECT mobility management
12: “MLCMD” #local mode
13: “MFACT” #DECT factory test
14: “MISC” #DECT miscellaneous API
15: “MEPT” #not used
CFG 0.0.0.0,0,0,0,0
Parameter Value Type Value Sources Default
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com