Manually Configuring the ShorePhone-IP110/115/210/212k/230/530/560/560g and BB24 Chapter C: IP Phone
280
C.2 Manually Configuring the ShorePhone-IP110/
115/210/212k/230/530/560/560g and BB24
If you are not using a DHCP server to provide the IP address and configuration parameters
to the phone, you need to manually set configuration parameters on the phone.
You can enter the phone configuration menu at bootup or by entering a key sequence from
the phone’s keypad.
To manually configure the ShorePhone-IP110/115/210/212k/230/530/560/560g or BB24
at bootup:
Step 1 Connect the Ethernet cable into the data jack on the back of the IP phone or
BB24 device.
Step 2 At the Password prompt, enter the default password 1234, or the password
provided by your system administrator, followed by the # key.
You have four seconds to enter the password, after which the phone enters
normal operation with its current settings.
The default password can be changed in ShoreWare Director. For more
information, see the ShoreTel 8 Administration Guide.
The BB24 setup screen can be accessed by pressing the upper leftmost and
lower rightmost buttons.
Step 3 Enter the values listed in Table C-4 when prompted. Press # to advance to the
next settings or * to exit.
Option Name Value Description
Server Type FTP, Trivial
FTP
When set to FTP, the IP phone uses the File Transfer Protocol (FTP) to
obtain configuration and application files at boot time.
To configure the phone to use the ShoreTel server as its boot server, the
Server Type must be configured to FTP.
Server Address Dotted-decimal
IP address
This is the boot server used in any of the following situations:
If the DHCP client is disabled
If the DHCP server does not send a boot server address.
•If the Boot Server parameter is set to Static.
To configure the phone to use the ShoreTel server as its boot server, the
Server Address is configured as the name or IP address of the ShoreTel
server.
FTP User Any string When the Server Type parameter is set to FTP, this is the user name used
when the IP phone logs in to the ShoreTel server. The default is
anonymous.
To configure the phone to use the ShoreTel server as its boot server, the FTP
User setting must be configured to “ftp.”
FTP Password Any string When the Server Type parameter is set to FTP, this is the password used
when the IP phone logs in to the ShoreTel server. The default password is
ftp.
To configure the phone to use the ShoreTel server as its boot server, the FTP
Password must be configured to “ShoreTel.”
Table C-3 Server Menu Options
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com