Chapter F: Session Initiation Protocol Configuration
ShoreTel 8 Planning and Installation Guide 297
F.2.1.2 Create a SIP Trunk Group
To create a new SIP trunk group, follow the procedure below:
Step 1 Launch ShoreWare Director and enter the user ID and password.
Step 2 Click on the Administration link to expand the list (if it has not already been
Step 3 Click on the Trunks link to expand the list.
Step 4 Click on the Trunk Groups link.
Step 5 In the Add new trunk group at site drop-down menu, select the location where
the new SIP trunk group will be added. In the of type drop-down menu, select
Step 6 Click Go to display a window similar to the one shown below.
Step 7 Enter the name of the trunk group in the Name field.
Step 8 Select the desired language for the trunk group in the Language drop-down
Step 9 Select the Teleworker check box if the SIP endpoint is not at the same site as
the trunk group being configured. Selecting Teleworker has the following
effects on the system behavior:
Figure F-2 Creating a SIP trunk group (inbound configurations)