Chapter G: ShoreGear Switches ShoreGear-90 Voice Switch
ShoreTel 8 Planning and Installation Guide 305
G.2 ShoreGear-90 Voice Switch
The following sections describe ShoreGear-90 resource capacity, LED behavior, and
connectors. The ShoreGear-90 is not supported in installations outside the U.S. and
Canada. Figure G-2 displays the ShoreGear-90 front plate.
G.2.1 Switch Capacity
Analog Circuit Resources
Ports 1-8: Eight Loop Start Trunks
Ports 9-12: Four Extensions or DID Trunks. A single command configures all
ports as either Extensions or DID trunks.
Power Failure Transfer Unit: Trunk Port 1 to Extension Port 12
Make Me Conference Resources: 12 ports
Ports 1-12
Maximum IP Phone Resources: 90 devices
Analog Port Reallocation: 60
Built-in Resources: 30
G.2.2 LED Descriptions
G.2.2.1 Power LED
The ShoreGear-90 has one power LED, which indicates the following:
On: The switch is operating normally.
Off: The switch has no power.
Flashing:
2 flashes—The switch failed its internal self-test. This indicates a hardware
failure. Replace the unit and submit a Return Material Authorization (RMA) to
ShoreTel, Inc.
Figure G-2 ShoreGear-90 Front Plate
Default
Switch
Audio Output Port
(night bell)
Power
LED
Network
LEDs
LAN 2
Connector
RS-232C
Maintentance
Port
RJ-21X
Telco Port
Status
LED
Audio Input Port
(music on hold)
Network
LEDs
LAN 1
Connector
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com