ShoreGear 24A Voice Switch Chapter G: ShoreGear Switches
338
G.11 ShoreGear 24A Voice Switch
The following sections describe ShoreGear 24A resource capacity, LED behavior, and
connectors. The ShoreGear 24A is not supported in installations outside the U.S. and
Canada. Figure G-11 displays the ShoreGear 24A front plate.
G.11.1 Switch Capacity
Analog Circuit Resources
Ports 1-24: Twenty four extensions
Make Me Conference Resource: 24 Ports
Ports 1-24
Maximum IP Phone Resources: None
G.11.2 LED Descriptions
G.11.2.1 Power LED
The ShoreGear 24A has one power LED, which indicates the following:
On: The switch is operating normally.
Off: The switch has no power.
Flashing
2 flashes—The switch failed its internal self-test. This indicates a hardware
failure; replace the unit and submit a Return Material Authorization (RMA) to
ShoreTel, Inc.
3 flashes—Booting via FTP. Flash memory might be corrupted. Go to the Quick
Look page to ensure that the system is running properly.
4 flashes—The IP address is unavailable. DHCP and BOOTP did not respond to
the IP address request, and the IP address is not available in nonvolatile
memory to continue boot process. The switch will automatically reboot in five
seconds and try again. Check the BOOTP/DHCP server and the network
configuration to ensure that the voice switch is receiving a valid IP address.
Figure G-11 ShoreGear 24A Front Plate
ShoreGear
-
24A
Default
Switch
Audio Output Port
(night bell)
Power
LED
RS-232C
Maintentance
Port
RJ-21X Telco
Port
Audio Input Port
(music on hold)
Network
LEDs
LAN
Connectors
Analog Phone RJ-11
Switch Port
LEDs
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com