CD-R/RW MASTER RECORDER CR500 (Recording)
When more than one audio file is recorded on a disc, if you press the [RE-
WIND] key while holding down the [STOP/HOME] key to execute the "Locate ABS 0"
function, the recorder goes the beginning of the first audio file. That is, the "Locate
ABS 0" function always locates the beginning of the disc (ABS 0), not the beginning
of each file. If you wish to select a desired audio file to be played back from among
more than one file, follow the instructions described on page 50.
• After executing "Locate ABS 0", press the [PLAY] key to start playback.
By closing a recorded BWF formatted disc, you can export WAV files to a Windows com-
puter. You can close a disc when you eject the disc. Note that you can make additional
recordings to a closed disc by reloading the disc.
Closing a disc
• While stopped, press the [OPEN/CLOSE] key.
"Un-closed track!" pops up, followed by the confirmation screen.
• To close the disc, press the [ENTER/YES] key. To cancel closing, press the [EXIT/NO]
If you press the [ENTER/YES] key, "Please Wait Closing track..." pops up.
After completing closing, the disc is ejected. Note that it takes some time for closing.
If you press the [EXIT/NO] key, the disc is ejected immediately.
You cannot make additional recordings to a disc which is finalized using the "Finalize"
item of the "DISK UTILITY" menu in the MENU mode (see page 92).
Each time you close a disc, the number of remaining recordable files decreases by one
and the remaining disc space decreases approximately one or two seconds (the screen
shows the number of remaining recordable files calculated by "97 - (the number of
recorded files + the number of times you close the disc)"). We recommend not closing a
disc unless it is necessary if you do not like to waste tracks and the disc space.
If you press the [REWIND] key while holding down the [STOP/HOME] key, the recorder
executes the "Locate ABS 0" function to go to the beginning of the disc and stops.
If you press the [1/space] key in the [MEMORY] key group, the recorder goes to the
beginning of the first audio file and automatically starts playback.
Because the "Auto Play" menu item of the "PLAY SETUP" menu in the MENU
mode is set to "On" by default, when you press the [1/space] key in the [MEMORY]
key group, the recorder automatically starts playback after skipping to the beginning
of the file (see page 84).