106
MR-8HD Owner’s Manual (Track editing)
9) Press the [MENU/ENTER] knob.
The display now returns to the track edit menu
screen, where “Copy-Paste Trk >” is highlighted.
10) Press the [STOP] key to exit the menu mode.
<Note>:
If a destination track has recorded
data, pasting the copied data overwrites the
previous data.
<Note>:
If you want to cancel the copy/paste
operation, move the cursor to "[CANCEL]"
on the screen, and press the [MENU/ENTER]
knob.
<Note>:
If you are not satisfied with the re-
sult, press the [UNDO/REDO] key to undo
the operation (see page 103).
5) Rotate the [MENU/ENTER] knob to select
"Source Track = *", and press the [MENU/ENTER]
knob.
You can now select the desired copy source
track(s) by rotating the [MENU/ENTER] knob.
The available options are:
• 1 through 8 (mono track)
• 1/2, 3/4, 5/6 and 7/8 (stereo tracks)
7) Rotate the [MENU/ENTER] knob to select the
destination track(s), and press the [MENU/ENTER]
knob.
“Dest. Track = *” is now highlighted on the
screen.
<Note>:
You cannot select the same track(s)
for the copy source and destination.
8) Rotate the [MENU/ENTER] knob to move the
cursor to "ENTER" at the bottom of the screen,
then press the [MENU/ENTER] knob.
The display shows "Please Wait", immediately
followed by "Completed" when the MR-8HD
completes the copy/paste operation.
You can select the same number of tracks as
the copy source track(s). For example, if you
select a mono track for the source, you can
only select a mono track for the destination.
6) Rotate the [MENU/ENTER] knob to select the
source track(s) to be copied, and press the
[MENU/ENTER] knob.
You can now select the desired copy
destination track(s)
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com