130
MR-8HD Owner’s Manual (Other functions)
By initializing the MR-8HD, you can initialize all global menu settings common to all songs, as
well as the time base and display contrast level.
1) While the recorder is stopped, press the
[MENU/ENTER] knob to enter the menu mode.
The display now shows the first page of the
menu selection screen, where "<< Back" is
highlighted initially.
You can also return to the previous screen by
pressing the [REWIND] key.
3) Rotate the [MENU/ENTER] knob to select "Inti.
Memory" on the second page, and press the
[MENU/ENTER] knob.
The display now shows the confirmation screen
for initializing.
4) Press the [MENU/ENTER] knob while holding
down the [RECORD] key.
The settings are immediately initialized.
The initialize is confirmed and the display
returns to the previous screen.
To cancel the initialization, press the [STOP]
key.
5) Press the [STOP] key to exit the menu mode.
Initialized item Default setting
Pre-roll time setting
Post-roll time setting
Delay type setting
MIDI sync out setting
MTC frame rate setting
Beat resolution mode setting
Peak hold time setting
Time base (shown when turning on the power)
Display contrast level
4 seconds
1 second
L-R (stereo) delay
Off
25 frames
Off
3 seconds
Bar/Beat
Factory present level
2) Rotate the [MENU/ENTER] knob to select
"System", and press the [MENU/ENTER] knob.
The display now shows the first page of the
system menu screen, where "<< Back" is
highlighted.
Initializing the MR-8HD
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com