134
MR-8HD Owner’s Manual (Troubleshooting)
<Trouble 1>
I cannot apply the effects.
Are the [EFFECT SEND] control for the track
you want to apply the effect and track fader
raised appropriately?
Raise the [EFFECT SEND] control(s) for the track(s)
(1 through 4) you want to apply the effect to send
signal(s) to the internal digital effects.
Also, make sure that the fader(s) for the track(s)
you want to apply the effect is(are) raised.
<Trouble 1>
Cannot export a WAV file to a personal computer.
Is the USB cable connected correctly?
Check the connection, as well as the USB cable.
Is the personal computer meets the
requirement?
The MR-8HD can export a WAV file to a personal
computer which runs on any of the following OS
systems.
Windows Me, 2000 or XP
Macintosh 0S X or higher
100100100010
EFFECT SEND
<Trouble 2>
I cannot apply the mic simulation effects.
Is the [INPUT A SEL] switch on the rear panel
is set to "MIC/LINE" position?
To apply the mic simulation effects to [INPUT A], the
[INPUT A SEL] switch on the rear panel must be set
to "MIC/LINE" position.
When you set the switch to any other position, you
can use the amp simulation effects for insert effects.
INPUT A SEL
MIC/LINE
GTR CLEAN
GTR DIST
<Trouble 2>
The MR-8HD drive icon is not shown on the personal
computer screen.
It may take some times for showing a
removable drive depending on a personal
computer.
It may take some times for reading the drive data.
Wait for a while until the drive icon appears.
On a Windows machine, the MR-8HD is shown as
"removable drive". On a Macintosh machine, it is
shown as "MR-8HD".
Troubles for effect
Troubles for USB connection
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com