MR-8HD Owner’s Manual (Punch in/out)
1) Press the [REC SELECT] key for the track you
are going to make punch in/out recording.
The track is record-armed.
2) Locate the recorder to the point before the punch-
in point and press the [PLAY] key to start
It may be a good idea to play the instrument
along with the playback sound, so that you can
get the tempo and feel.
3) When the recorder reaches at the point you want
to punch in, press the [RECORD] key while holding
down the [PLAY] key (see <Important note> below>).
The armed track is punched in (i.e. starts
<Note>: The punch in/out operation by yourself using the keys on the top panel sometimes
prevents you from concentrating on playing. In such a case, ask someone to operate the MR-
8HD, or use either of the other two punch in/out methods described later.
You can make punch in/out manually by using the [RECORD] and [PLAY] keys on the MR-8HD
4) When the recorder reaches at the point you want
to punch out, press only the [PLAY] key.
The recorder status switches from recording
5) Press the [STOP] key to stop the recorder.
6) Rewind the recorder and play back the part you
performed the punch in/out recording to check
If you are not satisfied with the result, use the
undo function to cancel the punch in/out
recording and try again.
MIN MAX LINE MIC LINE MIC LINE MIC LINE MIC
LOCATE REC END
LOCATE ABS ZERO
RECORD REWIND F FWD
1-6 > 7/8
1-4 > 5/6 STEREO
B / OUT
A / IN
STOREPLAY MODEAUTO PUNCH
MENU / ENTER
DYNAMIC CONDENSER TUBE
REVERB / DELAY TIME
INPUT A SELECT
INPUT A INPUT B INPUT C INPUT D
ABC1 DEF2 GHI3
PQR6 STU7 VWX8 YZ9 +-_0 DELETE
TO STEREO BUSS
You cannot punch in by only pressing the
[RECORD] key. You need to hold down the
[PLAY] key when pressing the [RECORD] key.
Press the [RECORD] key
while holding down the [PLAY] key.
Press only the [PLAY] key.
Playback Recording Playback
Punch in/out using the keys on the top panel