27
FR-2LE
Field Memory Recorder (Chapter 2: Before using the FR-2LE)
2) While "FS/BIT Mode=*****/**" is highlighted, press the [MENU/ENTER] key.
The current recording format starts flashing and you can now make selection (the default
format is "BWF44/16").
By pressing the [+] or [-] key while the current recording format is flashing, you can select
the desired recording format. The available options are listed on the following table.
Formatting a memory card
The FR-2LE accommodates memory cards formatted with the FAT32 file system.
When you use an unformatted memory card or a card which is formatted with a file
system other than FAT32, format it by the following procedure.
In the following procedure, it is assumed that a non-FAT32 formatted card is loaded,
and the display shows the warning message ("Illegal Format!").
1) While the warning message is shown, press the [MENU/ENTER] key.
The display automatically changes to show the "Format" menu item on the "Disk" menu, as
shown below.
You can select a reel number and recording format (FS/BIT mode) of the memory card to
be formatted. In the following example, it is assumed that you do not change the reel
number and only set the recording format.
You can also edit the reel number after formatting a card (see page 97 for details).
FR-2LE FIELD MEMORY RECORDER
LOCK
REWIND F FWD MARK
DEL MARK
PLAY
STOP/CANCEL
REC END
ABS0
LOC
CONTRAST QUICK SET
LIGHT ENTER
MENU /
MIC L MIC R
PREV NEXT
FILE
SHIFT
1, 2, 3, 4
3
3, 4
5
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com