FR-2LE
Field Memory Recorder (Chapter 3: Names and functions)
40
13) [FILE NEXT] / [LOC ] key
When more than one audio file exists on the card, pressing this key switches the current file
to the next entry in the list.
If any cue points (CUE 01 through 99) are stored in the current file, pressing this key while
holding down the [SHIFT] key skips forwards to the next cue point.
14) [SHIFT] key
Some key has a secondary (SHIFTed) function which is labeled in a rectangular box below
the key. To execute the SHIFTed function of such a key, press the key while holding down
the [SHIFT] key.
15) [MENU/ENTER] /
QUICK SET
key
Pressing this key enters the MENU mode. In the MENU mode, pressing this key completes
setting or executes the selected operation.
Pressing this key while holding down the [SHIFT] key enters the quick setup mode which
allows you to work on some menus on the Home screen (see page 55).
16) [+] /
LOCK
key
While making editing in the MENU mode, this key functions as the UP key.
Pressing this key while holding down the [SHIFT] key switches on or off the panel lock.
While the panel lock is active, only the following keys are effective.
Effective keys: [REC] key, [STANDBY] key, [+] /
LOCK
key
17) Internal microphones (L and R channels)
To make recording using the internal microphones, Select "Source Sel" on the Setup menu
in the MENU mode to the internal microphones (see pages 57 and 93). You can select
between high and low sensitivities.
18) [-] / [MARK] /
DEL MARK
key
By pressing this key while recording, playing back or stopped, the current position is stored
as a cue point "on the fly" (you cannot store a cue point on an MP3 file).
You can store up to 99 cue points (01 through 99). By default, cue points are labeled as
"Cue01", "Cue02", etc. according to the order you store points.
By pressing this key while holding down the [SHIFT] key while playback (or stopped), the
cue point before the current position is deleted.
19) [PLAY] key
Starts playback of the current file.
20) [STOP/CANCEL] key
Stops the transport.
When the unit is in the MENU mode, pressing this key directly exits the MENU mode.
Pressing the [F FWD] or [REWIND] key while holding down the [STOP] key moves the
transport as follows.
[STOP] + [REWIND]
[STOP] + [F FWD]
<Note>:
When there is more than one audio file, the unit locates the
beginning of the first recorded audio file.
Moves the transport to the beginning (ABS 0) of the file.
Moves the transport to the record end position (REC END) of the file.
<Note>:
When there is more than one audio file, the unit locates the
last recording position of the most recently recorded audio file.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com