52
FR-2LE
Field Memory Recorder (Chapter 4: Basic connections)
The FR-2LE provides the [USB] connector which is used for directly connecting to a PC.
By connecting the FR-2LE to a PC via this connector, you can control the current memory
card of the FR-2LE from the PC and transfer audio files to the PC.
See "Chapter 6: Exporting audio file to a PC" starting from page 69 for details about
audio file export/import.
Connecting to a PC
<Notes>
To use the FR-2LE with a personal computer,
make the USB mode active using the "USB Device Mode" item on the "Setup" menu
in the MENU mode. See page 71 for details.
A USB cable is not supplied with the FR-2LE. Purchase a commercially available
appropriate USB cable which conforms to the USB port standard.
Other Connections
POWER USB
PHONES MONITOR OUT
LR
HOLD
OFF
The FR-2LE is equipped with the [REMOTE] jack for connecting the remote controller
which is supplied with the unit.
Using the remote controller, you can enter record standby mode, start recording, or
mark cue points.
Connecting to the remote controller
HOT
GND
COLD
1
2
3
R
ANALOG IN
L
REMOTE
12V
STBYRECMARK
<Tip>
The supplied fixing belt for the remote controller can
be used as shown in the figure on the right. You can fix
it to a shoulder belt, an external microphone, etc.
Also you can fix a strap to the hole shown by an arrow
in the figure on the right.
[USB] connector
[REMOTE] jack Remote controller
fixing belt
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com