92
FR-2LE
Field Memory Recorder (Chapter 7: MENU mode/Setup menu)
Enabling or disabling the high pass filter (HPF)
1) Use the [+] or [-] key to select "Setup >" and press the [MENU/ENTER] key.
The display now shows the Setup menu.
2) Use the [+] or [-] key to select "HPF: ***" and press the [MENU/ENTER] key.
The current setting (by default, "Off") starts flashing and you can now make setting.
3) Use the [+] or [-] key to select "Off" or "On" and press the [MENU/ENTER] key.
You completes the setting and the display returns to the previous screen.
This item enables or disables the high pass filter.
In the following description, it is assumed that the FR-2LE is in the MENU mode and the main
menu screen is shown ("File >" is highlighted).
You can select from among the following options.
3) Use the [+] or [-] key to select the desired option and press the [MENU/ENTER] key.
You completes the setting and the display returns to the previous screen.
4) Press the [STOP/CANCEL] key to exit the MENU mode.
Limit The limiter function with the minimum attack and the maximum release time is enabled.
Off (default) Neither the ALC (Auto Level Control) nor Limiter function is disabled.
On The ALC (Auto Level Control) function is enabled.
<Note>:
This menu item can be set in the quick setup mode (see page 55).
4) Press the [STOP/CANCEL] key to exit the MENU mode.
You can select between "Off" and "On".
Off (default) The high pass filter is disabled.
On The high pass filter (100 Hz, -12 dB/oct.) is enabled.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com