Planning and Installation Guide Chapter 9: Network Requirements and Preparation
136
There are two ways to set admission control:
Determine the expected number of simultaneous intra-site calls for a site, and
multiply this number by the bandwidth required for each call for your selected
inter-site encoding.
When admission control is set this way, calls routing between sites will be blocked
if placing the call would exceed the number of calls supported by the configured
bandwidth.
For information about ShoreTel’s Admission Control feature, see Section 9.4.8 on page 119.
9.15.3 Setting Admission Control
The Admission Control Bandwidth parameters are set in the Site edit page of ShoreWare
Director. For information on setting this parameter, see Chapter 3, “Configuring Sites” in
the ShoreTel Administration Guide.
22 2904 1496 836 264
23 3036 1564 874 276
24 3168 1632 912 288
25 3300 1700 950 300
26 3432 1768 988 312
27 3564 1836 1026 324
28 3696 1904 1064 336
29 3828 1972 1102 348
30 3960 2040 1140 360
Bandwidth in Kbps per
Number of Calls Linear G.711 ADPCM G.729a
Table 9-17 Bandwidth with cRTP
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com