Chapter F: Session Initiation Protocol Planning and Installation Guide
ShoreTel 11.1 285
Groups of SIP trunks can be created at once but must be deleted individually (i.e.
one at a time).
SIP devices need to work with dynamic audio ports. Customers are expected to
disable the parameter that forces the system to use only audio port 5004.
Can be found in Director under Call Control > Options.
F.2 Configuration
Configuring SIP on your ShoreTel system consists of the following tasks:
Configuring the ShoreTel System via Director
Reserve the Trunk
Create a Trunk Group
Create a Trunk (static or dynamic)
Configure the SIP Device (per the manufacturer's instructions)
These tasks will be discussed in more detail below.
F.2.1 Configuring the ShoreTel System via Director
One of the first tasks involved in configuring your ShoreTel system for Session Initiation
Protocol (SIP) is to reserve the trunk. This can be done by following the procedure below:
F.2.1.1 Reserve the SIP Trunk
To reserve a new SIP trunk, follow the procedure below:
Step 1 Launch ShoreWare Director and enter the user ID and password.
Step 2 Click on the Administration link to expand the list (if it has not already been
expanded).
Step 3 Click on the Switches link.
Step 4 Click on the Add new switch at site drop-down menu and select the location
for the new switch, or edit an existing switch.
Step 5 Click on the of type drop-down menu and select the type of switch that will be
used to support the SIP trunks.
Step 6 Click Go to display a window similar to the one shown below.
Step 7 Enter a name for the switch in the Name field.
Step 8 Enter a description for the switch in the Description field.
Step 9 Click the Find Switches button next to the IP Address field and select the
appropriate switch to populate the field with an IP address.
Step 10The Ethernet Address field auto-populates.
Step 11Click on the Server to Manage drop-down menu and select the server that will
manage this switch.
Terms of Use | Privacy Policy | DMCA Policy
2006-2022 Rsmanuals.com